China Zlyj Gearbox for Rubber/Plastic Extruder manufacturer

Product Description

Superiority
1) Modest quantity
2) Huge transmission torque
three) High effectiveness
four) Minimal intake.

Product Description :
ZLYJ gearbox sequence are transmission products, which are specifically designed for single-screw extruder with higher precision, hard gear area, accompany with thrust. Adopting the technical specs stipulated in JB/T9050.1-1999, all CZPT gearboxes are created accordingly.
Principal Features:
1. The materials of equipment is the high toughness alloy metal, it is manufactured by carburizing, quenching (and other heat remedy), gringding process at very last. The equipment is in substantial precison ( 6 quality ) and large hardness ( reaches HRC54-sixty two). Besides, it characteristics reduced noise when working.
two. It contains higher bearing capability thrust, which is done dependable and can endure more substantial axial thrust.
three. All the objects are dealt with by forced lubrication and cooling method other than extremely couple of small specification items.
4. CZPT series gearbox is adopted by 6-side processing box. Its normal set up is horizontal, but can also be modified to vertical installation in accordance to customer's requirment.
5. Efficiency transmission, minimal sounds, prolonged operaton time.

Primary parameters :

Type Spec Input Energy(kw) N( enter) N(output) Output Torque Permitted axial thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-eight 5.five 800 a hundred 525 35 Ø35 25:01:00
133-eight 8 800 one hundred 764 39 Ø50 25:01:00
146-10 eleven one thousand 100 1050 fifty four Ø55 25:01:00
173-ten 18.five 900 90 1962 one hundred ten Ø65 twenty five:01:00
200-twelve.5 30 a thousand eighty 3581 a hundred and fifty five Ø75 twenty five:01:00
225-twelve.five forty five a thousand eighty 5371 one hundred eighty Ø90 25:01:00
250-sixteen fifty five 1120 70 7503 192 Ø105 twenty five:01:00
280-16 seventy five 960 60 7643 258 Ø110 twenty five:01:00
315-sixteen eighty five 960 sixty 13528 287 Ø120 twenty five:01:00
330-16 one hundred ten 960 60 17507 360 Ø135 twenty five:01:00
375-sixteen 132 960 60 21008 390 Ø150 twenty five:01:00
395-16 185 960 sixty 29442 400 Ø160 twenty five:01:00
420-16 160 960 sixty 31831 430 Ø160 twenty five:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 sixty 40640 500 Ø160/Ø170 twenty five:01:00
560-seventeen 540 one thousand fifty 84034 seven hundred Ø200 twenty five:01:00
630-ten 540 a thousand fifty 15712 770 Ø250 25:01:00

Our gain :
A> lengthy time experience and historical past
B> long time nitriding remedy and heating treatment by alone
C>advanced Fanuk sequence CNC laptop-managed milling machines
D>depth hole drilling device in 18meters duration, which make certain the straigtnss of barrel inside.
E> CAD drawing confirmation just before begin generating
F> Prompt soon after sale services
G>Land operator and registration funds twenty five, 000, 000RMB

Our company :
ZHangZhoug CZPT plastic machinery co.,ltd is located in HangZhou HangZhou town with brand of PYM(Previous HangZhou CZPT device screw co.ltd considering that 1988). The organization is specialised in creating screw barrel, gearbox CZPT series, t die, filter and extruder device. It has turn out to be 1 of the greatest supplier of main parts in HangZhou city which is the basement of plastic machinery.

 

FRQ:
1.Q:What are we?

A:We are manufacturing facility, with license of import and export items by ourself.

two.Q:How to get to us? 

A:The nearest airport is HangZhou airport, and the closest teach station is HangZhou station.

 

Warmly welcome to get in touch with us by underneath techniques: 

 

 

 

Welcome to our business .

 

 

 

 

 

 

 


/ Piece
|
1 Piece

(Min. Order)

###

Application: Agricultural
Function: Speed Reduction
Hardness: Hardened
Type: Worm Gear Box
Brand Name: Pym
Input Speed: 800

###

Customization:
Available

|


###

Type Spec Input Power(kw) N( enter) N(output) Output Torque Permitted axial thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00

/ Piece
|
1 Piece

(Min. Order)

###

Application: Agricultural
Function: Speed Reduction
Hardness: Hardened
Type: Worm Gear Box
Brand Name: Pym
Input Speed: 800

###

Customization:
Available

|


###

Type Spec Input Power(kw) N( enter) N(output) Output Torque Permitted axial thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00

Worm gear reducer gearbox

A worm gear reducer gearbox is a gear reducer gearbox that uses a worm gear train to reduce the required force. Unlike traditional gear reducer gearboxes, these units are small and require low horsepower ratings. This reduces their efficiency, but their low cost and compact design help make up for this shortcoming. However, these gear reducer gearboxes have some drawbacks, including their tendency to lock up when reversing.
worm reducer

high efficiency

High-efficiency worm reducer gearboxes are ideal for applications where high performance, repeatability, and accuracy are critical. It consists of an input hypoid gear and an output hypoid bevel gear. The input worm rotates perpendicular to the output worm, so for every revolution of the input worm, the output gear makes one revolution. This arrangement reduces friction (another source of energy loss) in a high-efficiency worm gear to at least two arc minutes.
Compared with worm gear reducer gearboxes, hypoid gearmotors offer several advantages, including lower operating costs and higher efficiency. For example, hypoid gear motors can transmit more torque even at high reduction ratios. Also, they are more efficient than worm gear reducer gearboxes, which means they can produce the same output with a smaller motor.
In recent years, the efficiency of worm gear reducer gearboxes has been dramatically improved. Manufacturers have made great strides in materials, design, and manufacturing. New designs, including dual-enveloping worm gear reducer gearboxes, increase efficiency by 3 to 8 percent. These improvements were made possible through countless hours of testing and development. Worm gear reducer gearboxes also offer lower initial costs and higher overload capability than competing systems.
Worm gear reducer gearboxes are popular because they provide maximum reduction in a small package. Their compact size makes them ideal for low to medium-horsepower applications and they are reticent. They also offer higher torque output and better shock load tolerance. Finally, they are an economical option to reduce the device's power requirements.

low noise

Low-noise worm gear reducer gearboxes are designed to reduce noise in industrial applications. This type of reducer gearbox uses fewer bearings and can work in various mounting positions. Typically, a worm reducer gearbox is a single-stage unit with only one shaft and one gear. Since there is only one gear, the noise level of the worm gear reducer gearbox will be lower than other types.
A worm gear reducer gearbox can be integrated into the electric power steering system to reduce noise. Worm reducer gearboxes can be made and from many different materials. The following three-stage process will explain the components of a low-noise worm reducer gearbox.
Worm gear reducer gearboxes can be mounted at a 90-degree angle to the input worm shaft and are available with various types of hollow or solid output shafts. These reducer gearboxes are especially beneficial for applications where noise reduction is essential. They also have fewer parts and are smaller than other types of reducer gearboxes, making them easier to install.
Worm gear reducer gearboxes are available from various manufacturers. Due to their widespread availability, gear manufacturers maintain extensive inventories of these reducer gearboxes. The worm gear ratio is standard, and the size of the worm gear reducer gearbox is universal. Also, worm gear reducer gearboxes do not need to be sized for a specific purpose, unlike other load interruptions.
worm reducer

pocket

A worm gear reducer gearbox is a transmission mechanism with a compact structure, large transmission ratio, and self-locking function under certain conditions. The worm gear reducer gearbox series products are designed with American technology and have the characteristics of stable transmission, strong bearing capacity, low noise, and compact structure. In addition, these products can provide a wide range of power supplies. However, these worm reducer gearboxes are prone to leaks, usually caused by design flaws.
Worm gear reducer gearboxes are available in single-stage and double-stage. The first type consists of an oil tank that houses the worm gear and bearings. The second type uses a worm gear with a sleeve for the first worm gear.
When choosing a gear reducer gearbox, it is essential to choose a high-quality unit. Improper gear selection can cause rapid wear of the worm gear. While worm gear reducer gearboxes are generally durable, their degree of wear depends on the selection and operating conditions. For example, overuse, improper assembly, or working in extreme conditions can lead to rapid wear.
Worm reducer gearboxes reduce speed and torque. Worm gears can be used to reduce the speed of rotating machines or inertial systems. Worm gears are a type of bevel gear, and their meshing surfaces have great sliding force. Because of this, worm gears can carry more weight than spur gears. They are also harder to manufacture. However, the high-quality design of the worm gear makes it an excellent choice for applications requiring high torque and high-speed rotation.
Worm gears can be manufactured using three types of gears. For large reduction ratios, the input and output gears are irreversible. However, the worm reducer gearbox can be constructed with multiple helices. The multi-start worm drive also minimizes braking effects.

Self-locking function

The worm reducer gearbox is self-locking to prevent the load from being driven back to the ground. The self-locking function is achieved by a worm that meshes with the rack and pinion. When the load reaches the highest position, the reverse signal is disabled. The non-locking subsystem back-drives the load to its original position, while the self-locking subsystem remains in its uppermost position.
The self-locking function of the worm reducer gearbox is a valuable mechanical feature. It helps prevent backing and saves the cost of the braking system. Additionally, self-locking worm gears can be used to lift and hold loads.
The self-locking worm gear reducer gearbox prevents the drive shaft from driving backward. It works with the axial force of the worm gear. A worm reducer gearbox with a self-locking function is a very efficient machine tool.
Worm gear reducer gearboxes can be made with two or four teeth. Single-ended worms have a single-tooth design, while double-ended worms have two threads on the cylindrical gear. A multi-boot worm can have up to four boots. Worm reducer gearboxes can use a variety of gear ratios, but the main advantage is their compact design. It has a larger load capacity than a cross-shaft helical gear mechanism.
The self-locking function of the worm reducer gearbox can also be used for gear sets that are not necessarily parallel to the shaft. It also prevents backward travel and allows forward travel. The self-locking function is achieved by a ratchet cam arranged around the gear member. It also enables selective coupling and decoupling between gear members.
worm reducer

high gear ratio

Worm reducer gearboxes are an easy and inexpensive way to increase gear ratios. These units consist of two worm gears - an input worm gear and an output worm gear. The input worm rotates perpendicular to the output worm gear, which also rotates perpendicular to itself. For example, a 5:1 worm gearbox requires 5 revolutions per worm gear, while a 60:1 worm gearbox requires 60 revolutions. However, this arrangement is prone to inefficiency since the worm gear experiences only sliding friction, not rolling friction.
High-reduction applications require many input revolutions to rotate the output gear. Conversely, low input speed applications suffer from the same friction issues, albeit with a different amount of friction. Worms that spin at low speeds require more energy to maintain their movement. Worm reducer gearboxes can be used in many types of systems, but only some are suitable for high-speed applications.
Worm gears are challenging to produce, but the envelope design is the best choice for applications requiring high precision, high efficiency, and minimal backlash. Envelope design involves modifying gear teeth and worm threads to improve surface contact. However, this type of worm gear is more expensive to manufacture.
Worm gear motors have lower initial meshing ratios than hypoid gear motors, which allows the use of smaller motors. So a 1 hp worm motor can achieve the same output as a 1/2 hp motor. A study by Agknx compared two different types of geared motors, comparing their power, torque, and gear ratio. The results show that the 1/2 HP hypoid gear motor is more efficient than the worm gear motor despite the same output.
Another advantage of the worm gear reducer gearbox is the low initial cost and high efficiency. It offers high ratios and high torque in a small package, making it ideal for low to medium-horsepower applications. Worm gear reducer gearboxes are also more shock-resistant.
China Zlyj Gearbox for Rubber/Plastic Extruder     manufacturer China Zlyj Gearbox for Rubber/Plastic Extruder     manufacturer
editor by CX 2023-04-06